Dry ice pellets

How it works

Pellets, air
and sublimation.

Dry ice cleaning is blasting in which the medium disappears after impact. Here is what happens, what you need for it and where its limits lie.

Temperature of solid CO₂
−78.5 °C
The ice turns straight into gas
No added water
The approach is always checked first
Surface by surface

Principle

What happens
under the nozzle.

Five steps of one process.
Choose a step or let the diagram run.

  1. Compressed air in the nozzle accelerates the dry ice pellets and carries them to the surface.

  2. The impact of the pellets helps to break up and loosen the layer of deposited dirt.

  3. Ice at roughly −78.5 °C cools the layer quickly. It can turn brittle and crack, so it comes away from the substrate more easily.

  4. Dry ice turns straight from a solid into a gas. Together with the air stream it helps to carry the loosened dirt away.

  5. The pellets leave no sand or water behind. The loosened dirt still has to be collected and cleared away.

Under the nozzle
01 — Jet. Compressed air in the nozzle accelerates the dry ice pellets and carries them to the surface.Simplified diagram. The effects work together during cleaning; the result depends on the surface and the dirt.

In practice

See
what it looks like.

More examples

What you need

Four parts
of one solution.

That is why you will find ice, equipment, service and partnership under one brand with us.

Blasting machine

It feeds pellets into the air stream. It is chosen according to the job and the air available.

Equipment catalogue

Compressed air

A compressor with sufficient flow and pressure, and for some machines an aftercooler as well.

Technology

Dry ice

Pellets sublimate continuously, so the delivery is planned for the date of the work. The cleaning produces no secondary waste.

Ice deliveries

Experience

Settings differ from surface to surface. If you are not sure, we will do the cleaning for you.

Cleaning as a service

Good to know

Where the method
has its limits.

  • The same procedure cannot be used on every surface. With a sensitive or unknown substrate, a trial on a small area decides.
  • Removing deposits does not replace disinfection, sterilisation or prescribed hygiene procedures.
  • Electrical equipment can be considered only after it has been professionally shut down and confirmed to be de-energised.
  • The method is not suited to large areas. It works best on machines, parts and places that are otherwise hard to reach.
  • The work requires ventilation, hearing protection and protective equipment.
Comparison with other methods
Illustrative visualisation: a worker cleans a mould in an injection moulding machine with dry ice

Frequently asked questions

Questions
we hear most.

Can’t find your answer? Write to us and we will add it.

All questions
Do I need to know the model of the cleaning machine?

Start by describing your job. We will discuss suitable technology, accessories and dry ice supply according to the surface and the conditions on site.

Can I order the cleaning on its own?

Yes. For the service, we first assess the photographs and description, run a trial if needed and agree the scope of the work. If you need to clean regularly with your own staff, we will also discuss equipment and dry ice supply.

Where does the removed dirt go?

Dry ice turns into gas. The loosened dirt remains, though, and has to be captured or cleared away properly. How it is collected is part of preparing the work.

Can every surface be cleaned in the same way?

The settings and suitability change with the material, the surface finish and the type of deposit. For a sensitive or unknown substrate, a trial on a small area helps.

What should I send with an enquiry?

A photograph of the whole item and a close-up, the surface material, the type of dirt, and the approximate extent and location of the work. Add whether it is a one-off job or regular maintenance.

It all fits together

Four directions.
One whole.

Material, equipment, service and partnership.
Choose where you want to go next.

Let’s start with your question

What can dry ice
do for you?

Tell us about your job. Together we will find the next step.

Base
Chebská 53, 356 01 Sokolov
Cleaning
We travel across the Czech Republic and the EU